Hardware for Outdoor Construction

Hardware for outdoor construction must last a long time. FineHouse specializes in the materials needed for outdoor construction and in particular, hardware.

To obtain any of our hardware, go to the how to order page

Scroll through the items that follow or go directly to Stainless Steel Screws, S.S. Lag Screws, S.S. Nails, S.S. Hangers& Framing Clips, Gate Hardware, Wood Plugs, Copper Flashing

 

Stainless Steel Lag Screws   Epoxy Coated Timber Screws

Lag Screws Stainless Steel Stainless Steel lag screws for structural fastening are preferred over galvanized. Use these lag screws when you require the best fastener for the job.   1/4" to 3" in length 3/8" to 3" in length 1/2" to 6" in length Lag Screws Epoxy Coated Epoxy coated timber screws have a smaller diameter shaft but are very strong and durable. Use these screws for longer lengths and where the screw will be covered by a wood plug.   Call for a quotation on your specific needs.

 

 

Siding Nails #304 Stainless Steel Ring Shank Stainless Steel, ring shank siding nails have a small head with a diamond pattern. Size Number of nails/ Lb 6d ~ 2" long 245 8d ~ 2-1/2" long 196 10d ~ 3" long 120 12d ~ 3-1/2" long 100

 

Common Nails #304 Stainless Steel Stainless Steel common nails are available with smooth, spiral or ring shanks. Also available are collated nails for framing guns. Size Number of nails/ Lb 4d ~ 1-1/2" long 228 6d ~ 2" long 144 8d ~ 2-1/2" long 94 10d ~ 3" long 67 12d ~ 3-1/2" long 60 16d ~ 3-1/2" long 44

 

Finishing Nails #304 Stainless Steel Stainless Steel finishing nails for all exterior trim assures a lifelong installation. Also available are collated finishing nails and brads in 15, 16 and 18 gauge. Size Number of nails/ Lb 3d ~ 1-1/4" long 649 4d ~ 1-1/2" long 434 6d ~ 2" long 247 8d ~ 2-1/2" long 146 10d ~ 3" long 102 16d ~ 3-1/2" long 86

 

	Copper & Brass Nails Specify copper nails for copper roofing, slate roofing, flashing, gutters and anywhere else that copper is used.   Copper Roofing Nails 3/4" to 2" in length Long Copper Nails 3" to 6" in length Copper Gutter Spikes, barbed 7" to 10"   Call for a quotation on your specific needs.
Copper Roofing Nails

 

 

Joist Hangers & Framing Clips

Stainless Hangers & Framing Clips #316 Stainless Steel Stainless Steel joist hangers, framing clips and angles are available. Decks and porches will last longer when built with stainless steel hardware. All hardware is 18 gauge Also available are joist hanger nails and box nails in Stainless Steel Description SS, Framing Angle, 1-3/8" x 4-1/2" SS, Framing Angle, 1-3/8" x 2-3/4" SS, Joist Hanger for 2x6 and 2x8 SS, Joist Hanger for 2x8 and 2x10 SS, Joist Hanger for 2x10 and 2x12 SS, Joist Hanger Nails, 1-1/2",    1lb/5lb   Please call for a quote with your exact requirements.

 

 

Pedestrian gate ring latch Latch is operable from both sides of the gate   Strap hinge shown on gate   Strap hinges of different length   Vertical bolts or "Cane Bolts" on a vehicular gate

Gate Hardware Pedestrian and vehicular gate hardware are provided in galvanized steel or galvanized steel with an enamel finish in black. Our gate hardware is designed for long term use and will often outlast the gate itself.     Gate Latches ~ For gates up to 3" thick. Strap Hinges ~ 7-36" Vertical Bolts Iron Grilles & Peekaboo's   Dutch door with strap hinges, vertical bolt & latch

 

 

Wood Plugs Wood plugs for outdoor construction are desirable for decking, handrails, structures or wherever appearance is important. Wood plugs hide fasteners and finish off nicely. FineHouse offers wood plugs for outdoor construction in Western Red Cedar, Mahogany and Ipe. Available sizes 3/8", 1/2", 5/8", 3/4", 1"

 

 

Formed Copper profiles   Copper profiles on trellis handrail and post cap Typical Profiles	Copper Flashing Copper Flashing is an ideal waterproofing material for many outdoor applications. Use copper flashing on the top rails of fences, at deck to house connections and as post caps to name a few.
	FineHouse offers a variety of copper flashing products. Copper is available as follows: Sheet Stock 3'x8' Coil Stock 12" & 24" Formed profiles Types of Copper offered: 12oz hard copper 12oz soft copper 16oz hard copper 16oz lead coated copper

Pre-Built Structures ~ Components ~ Contents ~ Design Reference ~ Plans

---

HOME | CONTACT FINEHOUSE | ABOUT FINEHOUSE | RESOURCES
Copyright 1999 -2011 by FineHouse,Ltd. all rights reserved.